Motor Actuator

See More About:    Direct Mount        Pressure Sensor        Spray Foam        

Thanks for visiting Electrical Stores. You could soon be saving a lot of money and even time using our website Electrical Stores. Do your search here for Motor Actuator and act wisely to reap the benefits. Thanks for Visiting

Frequently Asked Questions...

How do I change the halogen headlight in my 2003 Chev. Trailblazer? Does the grill have to be removed?


Best Answer...

Answer:

2003 Chevy Truck TrailBlazer 2WD V8-5.3L VIN P
Vehicle Level Lighting and Horns Headlamp Service and Repair

Service and Repair
Notes

HEADLAMP REPLACEMENT

REMOVAL PROCEDURE

Open and support the hood.
Remove the grille.

Pull up on the retaining tabs (1) in order to remove the headlamp assembly from the headlamp panel.
Disconnect the headlamp leveling electrical connector from the motor/actuator if equipped.
Disconnect the headlamp electrical connector (2) from the headlamp assembly.
Remove the side marker socket (4) from the headlamp assembly.
Remove the park/turn socket (3) from the headlamp assembly.
Remove the headlamp assembly from the headlamp panel.
INSTALLATION PROCEDURE

Position the headlamp assembly to the headlamp panel.
Index and seat the tabs on the park/turn socket (3) to the headlamp assembly.
Index and seat the tabs on the side marker socket (4) to the headlamp assembly.
Connect the headlamp electrical connector (2).
Connect the headlamp leveling electrical connector to the motor/actuator if equipped.
Align and install the 4 locator pins on the back of the headlamp assembly into the retaining tab holes.
Push down on the retaining tabs (1) in order to lock the headlamp assembly into the headlamp panel.
Install the grille.
Close the hood.